Join Sprintusers.com Today
By joining our free community you will have access to post topics, communicate privately with other sprint users (PM), download custom made ring tones, use our custom uploader (FOCUS), see LESS forum advertisements, upload photos in your own photo album and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
PDA


View Full Version : MM-7400 and Data Cable?

dja2k
01-23-2005, 07:49 PM
I just bought one of those usb charging data cables from ebay and I can't seem to get the drivers to work. Can anyone help me out?

dja2k

sitlet
01-23-2005, 09:19 PM
i actually just had the same problem with my phone for the past few weeks. i thought i was never gonna be able to get it to work, until today i stumbled upon a thread here. on the main screen on the phone type in ##USB#, then click modem. this will enable the phone to communicate with the computer. i dont know why you have to do this to get it to work. if you have any more questions feel free to ask.
dja2k
01-24-2005, 12:05 AM
i actually just had the same problem with my phone for the past few weeks. i thought i was never gonna be able to get it to work, until today i stumbled upon a thread here. on the main screen on the phone type in ##USB#, then click modem. this will enable the phone to communicate with the computer. i dont know why you have to do this to get it to work. if you have any more questions feel free to ask.

What do you set it as to use it in bitpim?

dja2k
RustyGrom
01-24-2005, 12:13 AM
If you are using the latest version there is an option for the MM-7400... its not it the somewhat logical order because it begins with MM and not PM
sitlet
01-24-2005, 12:46 PM
What do you set it as to use it in bitpim?

type ##USB# and select modem. i dont know why, but by selecting modem, it seems to "activate" the usb mode on the phone. once you do that, your computer should recognize it. i just used it with bitpim, and it worked fine after i selected "modem".
dja2k
01-24-2005, 02:58 PM
type ##USB# and select modem. i dont know why, but by selecting modem, it seems to "activate" the usb mode on the phone. once you do that, your computer should recognize it. i just used it with bitpim, and it worked fine after i selected "modem".

I already did that as that was the first reply you gave me. I doesn't work. Maybe I need a new driver. Bitpim tells me that the mode is wrong and CommsWrongPort: MM-7400: The port you are using is echoing data back, and is not valid for Brew data. Most likely you have selected the modem interface when you should be using the diagnostic interface.

dja2k
About SprintUsers.Com
 
SprintUsers.com was created in January 2002 as a resource for users of Sprint PCS products and services to learn about and share information. We have cll phone reviews, Cellular Accessories, Downloads, PDA reviews, Ringtones, all of the latest Sprint PCS news and information, an area where you can find help in creating a ring tone or custom image for you phone, and so much more. The most popular section is the message board where visitors can read and write messages, ask questions, and get advice about their cellular phone from other users.